Abstract

A precise and accurate method for the simultaneous determination of azaperone and azaperol in meat tissues has been developed. This paper describes the first method to be so fast, simple, and useful, especially for many laboratories that do not have sophisticated equipment. This method is based on LC separation and UV-Vis detection. During the sample preparation, the meat tissue was homogenized in acetonitrile at a ratio of 1:4 (tissue weight:acetonitrile volume). The homogenate was centrifuged, the supernatant was evaporated in a lyophilizator, and then the evaporation residue was dissolved in 20 µL of ethanol. For deproteinization, 15 µL of perchloric acid was added, and the sample prepared in this way was injected into a chromatographic column and analyzed using reversed-phased HPLC. The mobile phase consisted of 0.05 mol/L phosphate buffer pH 3.00 (component A) and acetonitrile (component B). UV detection was conducted at 245 nm. The experimentally determined LOQs were 0.25 µg/kg for azaperone and 0.12 µg/kg for azaperol. For both analytes, the calibration curves showed linearity in the tested concentration range from 50 to 300 µg/kg of tissue. The accuracy of the presented method did not exceed 15%, and the recovery was in the range of 85-115%. A validated analytical procedure was implemented for the analysis of various animal tissues for their content of azaperone and azaperol.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call