Development of stability indicating reversed-phase high-performance liquid chromatography method for determination of elobixibat in pure form and laboratory prepared tablets: Application to dissolution study.

Abstract

A simple stability-indicating reversed-phase high-performance liquid chromatography method has been developed for determination of elobixibat in presence of its potential impurities and degradation products. The chromatographic separation was carried on a Thermo scientific Base Deactivated Silica BDS Hypersil-C18 (150 × 4.6mm; 5μm) column using a mobile phase of acetonitrile and phosphate buffer (25mM, pH 2.5) in a ratio of (70:30, v/v). The experimental conditions were accurately investigated, and the method was validated according to ICH guidelines Q2 (R1). The drug was subjected to various stress conditions including acidic, basic, oxidative, and photolytic conditions. The method successfully separates the drug from the three reported impurities and different degradants. The method was also successfully applied for the determination of elobixibat in laboratory prepared tablets (5.0mg). Analysis shows no interference from excipients and degradation products. The method was also applied for performing in vitro dissolution testing of elobixibat laboratory prepared tablets. Since elobixibat is recently introduced into the market, there are no previous stability studies and no reported analytical methods for its determination. Thus, this study presents a validated and selective method that can be effectively employed in routine quality control studies.