Development of Soft Pneumatic Actuators Using High-Strain Elastic Materials with Stress Anisotropy of Short Fibers

Abstract

In recent years, soft robots, such as those with high human affinity and those that excellently imitate the movements of natural creatures, have gained considerable attention. In soft robots, structurally flexible soft actuators need to be used, not conventional motors or hydraulic/pneumatic cylinders. Various types of soft actuators have been developed depending on the driving principle. A pneumatic rubber artificial muscle is a kind of soft actuator that acquires power through injection of a working fluid, such as air, into an elastic structure, such as rubber. In this study, the authors developed an actuator, namely, the straight-fiber-type artificial muscle, which exhibits excellent contraction characteristics. This artificial muscle consists of a rubber tube that contains reinforcing fibers arranged in the axial direction. When air pressure is applied to the rubber tube, the artificial muscle expands only in the radial direction and contracts in the axial direction due to the restraining effect of the reinforcing fiber. While this artificial muscle exhibits excellent contraction properties, it has some drawbacks. One is the difficulty in enclosing the reinforced fibers that have accumulated in the rubber tube, making this artificial muscle difficult to manufacture. In this study, we investigated short-fiber-reinforced artificial muscles that can be easily manufactured. First, a short-fiber-reinforced rubber was prepared, and anisotropy was evaluated via a tensile test. Then, the short-fiber-reinforced artificial muscles were prepared, and their contractions rates were evaluated. The results confirmed that a short-fiber-reinforced rubber can be useful for the manufacture of artificial muscles.