Abstract
This paper present simple and inexpensive solar charge controller (SCC) using 8-bit microcontroller ATtiny85. The SCC using a pulse width modulation (PWM) signal to transistor and MOSFET to control current that generated by the microcontroller. The battery voltage state also monitored using a series resistor paralleled to the battery and the voltage drop connected to the microcontroller. The design of SCC consists of 3 major part i.e. microcontroller, current driver, voltage sensing. The purpose of measurement is to know the characteristics of 2 charging modes, mode 1 (one) and mode 2 (two), that occur in the system created. The measured data is the battery voltage as independent variable, and the solar panel’s voltage, the current that flow towards battery and the power provided for charging. Measurements are conducted from the battery voltage state of 7.84 V to 8.4 V. The results show that the solar charge controller using 8-bit microcontroller ATtiny85 was successfully managed to provide current and voltage according to expected design with 400 mA, 8.9 V for the first charging case and 150 mA, 12 V for the second charging case.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
