Abstract

AbstractIn this study, we have developed a new reactive ion etching (RIE)‐lag reduction technique in Si deep etching. The conventional RIE‐lag reduction technique has a dependence of polymeric layer deposition thickness on mask opening width in the deep reactive ion etching (DRIE) process (Bosch process). However, in our experiment, when the RIE‐lag was suppressed, the polymeric layer on the wider trench bottom remained and caused Black Si under typical process condition. Even if the Black Si is suppressed by optimization of process parameters, it appears when the trench becomes deeper. Therefore, the remaining of the polymeric layer is considered to determine the depth range for the RIE‐lag reduction. In order to avoid this limitation, we have developed a new RIE‐lag reduction technique that forms a double protection layer consisting of polymer and SiO2 on the trench bottom before the etching step in the DRIE process. The SiO2 layer formed by O2 plasma irradiation under polymeric layer has higher ability for removal than that of the polymeric layer and it can be removed clearly without Black Si phenomenon. Experimental result shows that this technique can obtain RIE‐lag free region up to an aspect ratio of 13. Within this aspect ratio range, the RIE‐lag free effect is considered to be applicable not only to trench pattern but also to other two‐dimensional mask patterns except hall pattern. Copyright © 2010 Institute of Electrical Engineers of Japan. Published by John Wiley & Sons, Inc.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.