Development of Response Surface Approach for Determination of Paracetamol, Chlorpheniramine Maleate, Caffeine and Ascorbic Acid by Green HPLC Method: A Desirability-Based Optimization.

Abstract

Design of experiment is an efficient and cost-effective tool to optimize the chromatographic separation of a multicomponent mixture. The central composite design was conducted to develop and optimize a green high performance liquid chromatography (HPLC) method for simultaneous quantitation of a quaternary mixture of paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid in their pharmaceutical dosage form as well as the determination of their dissolution profile. A five-level three-factor model was performed to investigate the effect of mobile phase composition, pH and flow rate on enhanced resolution and short run time. Analysis was performed using a Kinitex EVO C18 column and a mobile phase composed of methanol: 0.02M phosphate buffer pH3.3 (34:66, v/v) at 1.0mL/min using photodiode array detection. Optimum chromatographic separation was achieved in <6min with a desirability of 0.999. Linearity was achieved over a range of 1.00-300.00, 1.00-50.00, 2.00-50.00 and 2.00-100.00μg/mL for paracetamol, chlorpheniramine maleate, caffeine and ascorbic acid, respectively, with a limit of detection (<0.1μg/mL). The greenness profile was evaluated using the analytical eco-scale and Analytical GREEnness Metric Approach with values of 81 and 0.77, respectively.