Abstract
The potential utilization of microparticulated whey protein (MWP) as a fat mimetic in reduced calorie model sauces and dressings was examined. The influence of solution composition (pH and salt) and processing (homogenization and heating) on the properties of MWP (0–20%) suspensions (0.01M phosphate buffer, pH6) was studied. High-pressure homogenization (6000psi, 1 pass) of MWP suspensions significantly reduced protein particle size and improved their stability to sedimentation. The lightness and viscosity of the suspensions increased with MWP concentration, which was attributed to the influence of the protein particles on light scattering and fluid flow. Thermal treatment (90°C for 5min) of MWP suspensions increased their viscosity, which was associated with increased protein aggregation. Solution pH (2–8) also had an impact on the particle size and microstructure of the MWP suspensions, which was attributed to changes in particle charge: the charge went from negative to positive with decreasing pH, with an isoelectric point around pH4.5. Addition of calcium chloride (10mM) to heated systems did not cause significant changes in suspension rheology, which was attributed to pre-denaturation of the MWP. Overall, this study highlights conditions where MWP can be used as potential fat replacers in low calorie food emulsions. MWP increases the lightness and viscosity of products, thereby mimicking some of the desirable characteristics of fat droplets.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.