Abstract
The application of Si sensors coupled to Gd converters as thermal neutron counters is assessed in a series of test experiments on the neutron beam, among which scattering from standard samples. The prototype 1d detector is a Si microstrip sensor directly coupled to natural Gd converter and equipped with standard front-end electronics. The raw scattering data, collected by interfacing the detector with the data acquisition system available at the neutron source, show advantages and limits of this technology when applied to neutron detection. To improve the performances of the Si-based detector by means of an optimized discrimination of the neutron signals from noise and background radiation, a pulse shape analysis method is proposed. The effectiveness of this method is then explored by experimental tests on the neutron beam of two more prototype detectors, namely a PIN diode coupled to 157Gd2O3 converters, and a Silicon photo-multiplier (SiPM) coupled to neutron scintillators. This study is aimed to real time applications and single event storage of the neutron information in time of flight instrumentation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.