Abstract
Abstract MCrAlY materials are widely used as bond coats for thermal barrier coatings on turbine blades. The aim of this work is to improve mechanical properties and wear resistance of thermal sprayed NiCoCrAlY-coatings by strengthening the coating with hard phase particles. In order to retain the effect of the dispersion reinforcement at high temperatures, the use of temperature-stable oxide hard phases such as ZrO2 is necessary. To realise this new material structure, the high energy ball milling process is applied and analysed. With this process it is possible to achieve a homogeneous distribution of the oxide hard phases in the NiCoCrAlY matrix. The mixture ratio between NiCoCrAlY and ZrO2 was varied between 5 wt-% and 10 wt-% ZrO2. The influences of the milling time of the high energy ball milling process on the distribution of the hard phases in the metal matrix were analysed. After spraying with a HVOF system the mechanical properties of the coatings are measured and compared with conventional NiCoCrAlY coatings.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
