Development of novel high power-short time (HPST) microwave assisted commercial decontamination process for dried turmeric powder (Curcuma Longa L.).

Abstract

The commercially available dry turmeric powder at 10.34% d.b. moisture content was decontaminated using microwaves at high power density for short time. To avoid the loss of moisture from turmeric due to high microwave power, the drying kinetics were modelled and considered during optimization of microwave decontamination process. The effect of microwave power density (10, 33.5 and 57Wg-1), exposure time (10, 20 and 30s) and thickness of turmeric layer (1, 2 and 3mm) on total plate, total yeast and mold (YMC) counts, color change (∆E), average final temperature of the product (Taf), water activity (aw), Page model rate constant (k) and total moisture loss (ML) was studied. The perturbation analysis was carried out for all variables. It was found that to achieve more than one log reduction in yeast and mold count, a substantial reduction in moisture content takes place leading to the reduced output. The microwave power density significantly affected the YMC, Taf and aw of turmeric powder. But the thickness of sample and microwave exposure time showed effect only on Taf, aw and ML. The colour of turmeric and Page model rate constant were not significantly changed during the process as anticipated. The numerical optimization was done at 57.00Wg-1 power density, 1.64mm thickness of sample layer and 30s exposure time. It resulted into 1.6×107 CFUg-1 YMC, 82.71°C Taf, 0.383 aw and 8.41% (d.b.) final moisture content.