Development of nickel and silver ceramic filters supported on K10 montmorillonite clay for water disinfection

Abstract

Abstract This study aimed to obtain ceramic filters with bactericidal action for water disinfection. For this, aqueous suspensions of montmorillonite K10 clay were prepared at concentrations of 48%, 50%, and 52%. Later, these were impregnated into polymeric sponges in order to form the ceramic skeletons by using the replica technique. The ceramic filters were submerged in nickel resins doped with 0.25 and 0.50 mol% silver. These resins were obtained by the Pechini method and heat-treated at 600 and 700 ºC for 2 h. Moreover, techniques such as X-ray diffraction, particle size analysis, scanning electron microscopy, energy dispersive spectroscopy, compressive strength, water absorption, and apparent porosity were used to characterize the filters, and their performance was analyzed by a bactericidal test. The bactericidal test results showed that the filters impregnated with the resin containing 0.50 mol% of silver promoted the total elimination of the Staphylococcus aureus and Escherichia coli bacteria.