Abstract
The effects of a Maillard reaction between glucose and chitosan on the resultant chitosan films and the bonding properties of chitosans with different molecular weights were investigated. In film preparation, chitosan and glucose were dissolved in 1% acetic acid and dried in a Petri dish at 50°C. The bonding properties of the Maillard-reacted chitosan in three-ply plywood were evaluated by a tensile shear test. The weight, color, free amino groups, insoluble fraction, and thermal properties of the film changed significantly as the amount of added glucose increased. However, few differences in these properties due to the use of chitosan of different molecular weights were observed. The effect of glucose addition on the tensile strength of the film differed for chitosans of different molecular weights. Improvement of the strength by 10 wt% glucose addition was observed in low-molecular-weight chitosans. The dry- and wet-bond strengths were significantly enhanced with increasing glucose addition for low-molecular-weight chitosans. In addition, good bond strength was maintained even in 1% acetic acid solution. It was thus clarified that the bonding properties of low-molecular-weight chitosan were improved markedly by the environmentally safe method of glucose addition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.