Development of new lubricating grease formulations using recycled LDPE as rheology modifier additive

Abstract

The recovery of plastic waste but also its applicability in product development may be an incentive to industry, since the use of such plastics represents a cheaper source of raw material. The aim of the present paper is to study the feasibility of recycling polyolefins as additives to improve the rheological properties of lithium 12-hydroxystearate lubricating greases. The effects that both soap and recycled low-density polyethylene (LDPE) concentration exert on the rheology of lithium lubricating greases and its relationship with grease microstructure are discussed in this work. In this way, different lubricating grease formulations were manufactured by modifying the concentration of lithium 12-hydroxystearate and content of recycled LDPE, according to a RSM statistical design. These lubricating greases were rheologically characterized through small-amplitude oscillatory shear (SAOS) and viscous flow measurements. In addition to these, scanning electronic microscopy (SEM) observations and mechanical stability tests were also carried out. Recycled LDPE was found to be an effective additive to modify grease rheology, acting as filler in the soap entangled microstructure. The values of both apparent viscosity and viscoelastic functions in the linear viscoelastic region increase with soap and recycled polymer concentrations. However, the addition of recycled LDPE distort the microstructural network of these greases resulting greases with less relative elastic characteristics and poorer mechanical properties as LDPE content increases.