Abstract
Abstract. The paper presents the results of laboratory studies of scaling laws, the kinetics of high-temperature oxidation and decarbonization of 60Si2CrA steel. It has been established that the waste is intensifi ed sharply when the temperature of the metal is about 1000 °C. The appearance of the fi rst liquid-phase areas in the scale occurs at temperatures of 1270 – 1280 °C, and the melting of the scale, accompanied it to the runoff in metal surface begins at 1300 °C. The temperature range of the most intense decarbonization of steel is 950 – 1100 °C; at 1175 °C and above on the metal surface, the formation of the mixed zone thickness of 0,030 – 0,045 mm, complicating remove scale from the surface of the metal. The received empirical dependence helps to forecast the waste of metal during heating for rolling. For practical use, based on a deterministic mathematical model, a metal-saving temperature mode for heating of continuously cast billets in continuous walking-beam furnaces has been developed.
Highlights
The paper presents the results of laboratory studies of scaling laws, the kinetics of high-temperature oxidation and decarbonization of 60Si2CrA steel
The appearance of the first liquid-phase areas in the scale occurs at temperatures of 1270 – 1280 °C, and the melting of the scale, accompanied it to the runoff in metal surface begins at 1300 °C
The received empirical dependence helps to forecast the waste of metal during heating for rolling
Summary
РАЗРАБОТКА МЕТАЛЛОСБЕРЕГАЮЩИХ РЕЖИМОВ НАГРЕВА В МЕТОДИЧЕСКИХ ПЕЧАХ НЕПРЕРЫВНОЛИТЫХ ЗАГОТОВОК. Представлены результаты лабораторных исследований закономерности окалинообразования, кинетики высокотемпературного окисления и обезуглероживания стали марки 60С2ХА. Традиционно нагрев последних осуществляют в методических печах, при этом помимо окисления стали происходит процесс ее обезуглероживания. Для разработки таких режимов нужны эмпирические количественные данные о влиянии температуры и времени нагрева на угар и обезуглероживание стали конкретной марки. В настоящей работе представлены результаты исследования малоокислительных и малообезуглероживающих режимов нагрева в методических печах с шагающим подом непрерывнолитых заготовок рессорно-пружинной стали марки 60С2ХА. Исследования включали три блока: получение количественных данных по влиянию температурно-временного фактора на кинетику окисления и обезуглероживания стали; установление температур плавления окалины; разработку малоокислительных температурных режимов нагрева в методических печах. При нагреве образца стали в атмосфере воздуха происходит увеличение его массы за счет окисления железа и легирующих компонентов. Зависимость угара стали марки 60С2ХА от температуры t и времени выдержки
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have