Abstract
ABSTRACTHigh-density plasma technology is becoming increasingly attractive for the deposition of dielectric films such as silicon nitride and silicon dioxide. In particular, inductively-coupled plasma chemical vapor deposition (ICPCVD) offers a great advantage for low temperature processing over plasma-enhanced chemical vapor deposition (PECVD) for a range of devices including compound semiconductors. In this paper, the development of low temperature (< 200°C) silicon nitride and silicon dioxide films utilizing ICP technology will be discussed. The material properties of these films have been investigated as a function of ICP source power, rf chuck power, chamber pressure, gas chemistry, and temperature. The ICPCVD films will be compared to PECVD films in terms of wet etch rate, stress, and other film characteristics. Two different gas chemistries, SiH4/N2/Ar and SiH4/NH3/He, were explored for the deposition of ICPCVD silicon nitride. The ICPCVD silicon dioxide films were prepared from SiH4/O2/Ar. The wet etch rates of both silicon nitride and silicon dioxide films are significantly lower than films prepared by conventional PECVD. This implies that ICPCVD films prepared at these low temperatures are of higher quality. The advanced ICPCVD technology can also be used for efficient void-free filling of high aspect ratio (3:1) sub-micron trenches.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.