Abstract
Thermomechanical treatment (TMT) of plates is used to obtain the optimum combination of strength and toughness. Although this technique is applied to high strength low alloy (HSLA) steels, its application to ultrahigh strength steel (UHSS) is still under study. In this investigation, four C, Mn, Cr and Mo alloys, some with Nb or Ti additions, were prepared by electroslag refining (ESR), hot rolling with TMT and variations in cooling rate. Mechanical properties were evaluated and microstructural features were characterised. The oil cooled specimens of titanium alloy produced the optimum properties with higher strength values: ultimate tensile strength (UTS)=2177 MPa, yield strength (YS)=1795 MPa, elongation (El)=8% and impact toughness=713 kJ m−2, with microstructures predominantly consisting of lath martensite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.