Development of linear power operational amplifier power supply with pre-regulated voltage controller for TPS correction magnets

Abstract

The Taiwan Photon Source (TPS) is a renowned 3 GeV synchrotron accelerator light source. Over the past decade of successful operation, it has demonstrated outstanding performance, notably in average beam trip downtime, meeting international standards. A continuous regimen of scheduled equipment upgrades has been maintained across all subsystems to ensure ongoing improvement and the preservation of an optimal research facility environment. The central focus of this study revolves around the design and realization of a TPS correction magnet power supply employing Linear Power Operational Amplifiers (LPOA) in conjunction with a pre-regulated voltage controller. The power source predominantly features APEX Corporation's PA05 LPOA, characterized by bipolar output, high internal power dissipation, and wide bandwidth. Additionally, a DC Current Transducer (DCCT) was employed as the current feedback element, integrated with the pre-regulator voltage controller to form a closed-loop current modulation circuit, providing the variable voltage required by the LPOA. Through these measures, we have successfully developed an LPOA power supply unit equipped with a pre-regulated voltage controller for TPS correction magnets. The prototype device boasts a maximum output current of ±10 A, operating at 24 V. Validation through control loop design has led to rapid and stable output current performance. The output current ripple is maintained within 100 μA, with a rise time of 75 μs during step response. During frequency response testing utilizing a 0.1 V disturbance signal, the gain margin resides within -3 dB at an 11.2 kHz bandwidth and the phase margin within -45∘ at a 5.1 kHz range. Long-term output current stability is sustained within ten ppm. Finally, a hardware prototype circuit has been constructed in the power supply laboratory, featuring a ±24 V input voltage and ±10 A output current, achieving a maximum rated power of 240 W.