Abstract
Shear testing of large size rock mass in the laboratory is a tedious and challenging task. Difficulties further arise when testing is done with rock bolts. Complex interaction between intact blocks of mass, joint and bolts creates problems during shear testing. Hence, for testing of large rock mass with bolts, special technique and facilities are required. The present paper summarized the details of the development of a large sized direct shear testing facility for passive bolt—reinforced rock masses. A specially designed servo-controlled direct shear test apparatus having shear box of size 750 mm × 750 mm × 1000 mm has been fabricated in the Geotechnical engineering laboratory of IIT Roorkee. The normal loading capacity of the apparatus is 1500 kN while shear loading capacity is 2000 kN. To evaluate the performance of the apparatus, specimens of blocky mass were prepared and tested without and with bolts. The present paper discusses the details about the large direct shear apparatus and testing methodology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
