Development of infrared-assisted hybrid solar dryer for drying pineapple slices: Investigation of drying characteristics, mass transfer parameters, and quality attributes

Abstract

The research aims to the development and performance evaluation of an infrared-assisted hybrid solar dryer (IR-HSD) for drying pineapple slices. The IR-HSD contains an evacuated tube solar collector, blower assembly, drying chamber, infrared heater, phase change material (PCM) chamber, etc. The study investigates and compares the thermal profiling, drying kinetics, mass transfer parameters and quality attributes of pineapple slices dried using different methods, such as direct drying, phase change material (PCM)-assisted drying, PCM + IR-assisted drying, and sun drying. The average temperatures achieved inside the drying chamber for direct drying and PCM-assisted drying were 60.16 °C and 57.29 °C, respectively, while the temperature reached 60 °C for PCM + IR assisted drying. The average drying rate in PCM + IR drying was higher than in direct and PCM-assisted drying methods. The best-fitting models were the Modified Page model for direct and PCM + IR-assisted drying and the Midilli-Kucuk model for PCM-assisted and sun drying. The higher effective moisture diffusivity for PCM + IR-assisted drying was 2.59 × 10−9 m2/s, followed by direct and PCM-assisted drying. Similarly, the convective mass transfer coefficient obtained was 1.085 × 10−7 m/s, 8.321 × 10−8 m/s, and 1.381 × 10−7 m/s for direct, PCM-assisted, and PCM + IR-assisted drying, respectively. The superior quality attributes such as total flavonoid content (TFC), total phenolic content (TPC), and antioxidant activity were observed in all drying approaches with retention of colour except open sun drying, which decreased significantly. FTIR spectroscopy analysis confirmed the presence of different bioactive, including aromatic compounds, phenols and hydrocarbon functional groups. The infrared-assisted hybrid solar drying of pineapple slices showed a better drying process and quality attributes.