Abstract
An in situ observation technique using scanning ion microscopy (SIM) to investigate the behaviour of phase transformation from austenite to ferrite in low-alloy steel is proposed. The most important advantage of the technique is the combined observation by SIM and fabrication by focused ion beam (FIB) at a wide range of temperature, from room temperature to 1673 K. Using this advantage, we have developed a new technique for observing intragranular ferrite (IGF) transformation in low-alloy steel, which is the phase transformation occurring at an inclusion existing inside a grain of austenite phase. We successfully observed the IGF transformation at 873 K by examining an inclusion exposed to the specimen surface by FIB fabrication at 1073 K during cooling from 1673 K. From the results of the in situ observation, we determined the role of Mn depletion due to precipitation of MnS for IGF transformation in steel.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
