Abstract
This study examines the physical, mechanical, microstructural, and attenuation properties of high-density concrete exposed to temperatures ranging from 200°C to 1200°C. For this purpose, heavy-density concrete containing 25%, 50%, 75%, and 100% dolerite aggregates was developed and compared with three ordinary concrete mixes. Pre- and post-heated concrete specimens were evaluated for mass and density loss, compressive strength, rebound hammer, X-ray and gamma-ray attenuation, Half Value Layer (HVL), and Ten Value Layer (TVL) along with microstructural properties determined by scanning electron microscopy and Energy Dispersive X-ray. The results showed that the incorporation of 75% dolerite aggregate during pre- and post-heating yielded high compressive strength whereas low mass and density loss. The same mixture showed significant improvement in gamma ray shielding at all temperatures. The Half Value Layer and Ten Value Layer values showed a reduction in the thickness of concrete as a shield. It is recommended that dolerite heavy-density concrete is a potential radiation shield at high temperatures ranging from 200°C–1200°C in fourth-generation nuclear power plants.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.