Development of Highly Sensitive and Selective Cholesterol Biosensor Based on Cholesterol Oxidase Co-Immobilized with α-Fe2O3 Micro-Pine Shaped Hierarchical Structures

Abstract

This paper reports the fabrication of highly-sensitive and selective voltammetric/amperometric cholesterol biosensor based on cholesterol oxidase co-immobilized with α-Fe2O3 micro-pine shaped hierarchical structures. The α-Fe2O3 micro-pine shaped hierarchical structures were synthesized by facile hydrothermal process in large quantity and characterized in detail using various techniques. The detailed studies demonstrated that the as-synthesized α-Fe2O3 hierarchical structures are grown in very high density exhibiting well-crystallinity and demonstrating rhombohedral α-Fe2O3 crystal structures. The fabricated cholesterol biosensors based on α-Fe2O3 hierarchical structures exhibited a very high and reproducible sensitivity of 78.56μA/mMcm2 and detection limit (based on S/N ratio) of 0.018mM. The biosensor exhibited a linear dynamic range from 0.1-8.0mM and correlation coefficient of R=0.9951. A lower value of apparent Michaelis-Menten constant (Kmapp), of 0.007mM, exhibited a high affinity between the cholesterol and ChOx immobilized on α-Fe2O3 micro-pine shaped hierarchical structures. To the best of our knowledge, this is the first report in which α-Fe2O3 micro-pine shaped hierarchical structures are used for the fabrication of highly sensitive and selective cholesterol biosensor.