Abstract
The high-resolution imaging technique used in liquid environments involving dynamic mode atomic force microscopy (AFM) with a frequency modulation (FM) detection technique has been newly developed on the basis of a commercial atomic force microscopy (AFM) apparatus, which is, generally, extremely difficult because of the large decrease in Q-factor caused by hydrodynamic damping in liquids. Through various improvements and optimization, the noise density of the improved deflection sensor was 29 fm/√Hz (f0 = 141 kHz) in liquid. In addition, the noise level and bandwidth of the FM detector were improved to 6 mHz/√Hz and 6 kHz, respectively. Thermal drift was successfully regulated at less than 1 nm/min in air for a sufficiently long time without any special air conditioning treatments. As a result, we succeeded in obtaining high-resolution images of polypropylene sheet, Au thin film, and DNA structures in a buffer solution. Therefore, liquid environments are proved to be suitable for high-resolution imaging by FM-AFM under ultrahigh vacuum (UHV) condition.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
