Development of high hydrogen permselective membranes by using a vapor treatment method

Abstract

Abstract In recent years, the depletion of energy resources and global warming have led to the promotion of new energy resources. Hydrogen is attracting attention as one of the energy sources for the carbon-neutral society by 2050. Membrane separation is a method for separating and purifying hydrogen. In this study, we focused on developing high hydrogen permselectivity of silica membranes. We investigated the conditions necessary for membrane production to obtain a thin, dense separation layer. The results exhibited that the hydrogen permeation selectivity was enhanced in the silica membrane through the utilization of a 2-step deposition technique, which involves the combination of alternative feed and counter-diffusion chemical vapor deposition (CVD). The H2 permeance achieved by the 2-step method is 1.4×10−6 [mol m−2 s−1 Pa−1], representing 1.4 times higher than that of counter-diffusion CVD. In addition, the permeance ratio, which represents hydrogen selectivity, was significantly enhanced with the 2-step method, with H2/C3H8 = 260, twice as high as with CVD. Elemental mapping analysis of the cross-sectional structure revealed a concentration gradient in the deposited silica within the intermediate layer. This indicates that the silica separation layer may become an asymmetric structure. The 2-step method is expected to yield a thinner dense layer, which could contribute to improved permeance of silica separation membranes by reducing permeation resistance.