Abstract
The shell and tube heat exchanger was designed using a stainless pipe with a diameter of 203.2 mm (8 inches) and 3 mm thick. The design calculation results indicates that heat transfer rate was about and a tube length of 0.7 m was used and the number of tubes Nt is 17, this is required to cool the syngas from 350℃ to 80°C theoretically. Results obtained from CFD ANSYS software 2022 version showed that the verification of the model was achieved by comparing the theoretical temperatures of the syngas with the temperatures predicted from the simulation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: International Journal of Research and Innovation in Applied Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
