Development of gum Arabic/chitosan-infiltrated photoluminescent wooden smart window with multifunctional properties

Abstract

Photochromic wood materials are very important and appealing for smart windows. Herein, we describe the development of transparent photochromic wood that can change its color under ultraviolet and visible lights. Photoluminescent transparent wood was prepared by delignification of wood followed by infiltration with a combination of gum Arabic/chitosan/acrylic acid (ACA), lanthanide-activated aluminum strontium oxide (LASO) as a photoluminescent, and Genipin as a cross-linking agent. The produced mixture was then infused into the lignin-modified wood substrate. In order to develop a luminescent colorless wood, the LASO phosphor must be well-distributed in the ACA solution without aggregation. According to the colorimetric parameters and photoluminescence spectra, this optically active wooden window switched color from transparent in daylight to green when UV-irradiated. Transmission electron microscopy (TEM) was employed to examine the morphological features of phosphor nanoparticles. The morphological features of the developed smart wooden window were investigated by scanning electron microscopy (SEM), X-ray fluorescent spectroscopy (XRF), and energy-dispersive X-ray analyzer (EDX). The mechanical performance was explored by investigating both hardness and resistance to scratches. The luminescent woods displayed an emission band at 518 nm when excited at 365 nm. The superhydrophobic performance and ultraviolet shielding of woods were improved upon increasing the phosphor content.