Abstract
A simple spectrophotometric method in conjunction with flow injection analysis is developed for the quantitative analysis of 1-napthylthiourea (ANTU). The reaction is based on the alkaline hydrolysis of ANTU to 1-naphthylamine at 30°C, coupled with diazotized sulphanilic acid resulting in 4-(sulphophenylazo)-1-naphthylamine which is monitored at 495 nm. The limit of detection (S/N = 3) is 0.01 mg/L with a sampling throughput of 45/h. The method is linear over the range of 0.05–120 mg/L (R2=0.9995,n=7), with calibration equation y = 0.031x−0.018 (y = absorbance; x = mg/L) and relative standard deviation (n=3) 1.8–3.6%. Experimental variables are optimised, and the interfering effects of different pesticides, organic compounds, cations, and anions at environmentally relevant concentrations are investigated. The analysis of ANTU in spiked water samples is extracted with solid phase procedure using disposable Sep-Pak C18 cartridges, and the recovery was 93 ± 1.9–110 ± 3.0%. The results of the proposed method are compared with the HPLC method by applying the F-test and paired Student t-test at 95% confidence level.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
