Development of Electromagnet for Laboratory Water Treatment Experiments

Abstract

Water is said to be magnetized when it flows across the magnetic field and magnetized water finds its application in many areas of life. Despite the numerous benefits of magnetized water, very little works have been reported on the development of magnet for water magnetizer application. In most of the reported works, the detailed theoretical analysis and design procedure required for the development of the magnet was not accounted for; hence the need for the present study. Electromagnetic means of producing flux density is considered in this study due to its advantage of flux density variation, which is not achievable with the use of its permanent magnet counterparts. The design equation of short electromagnet was derived from the existing equations of coil magnetic flux density and then used for the air core electromagnet design. The variation of the magnetic flux density with the distance between two electromagnets was empirically investigated. The performance of the developed electromagnet is satisfactory, as the flux density varies between 814.6 and 510G corresponding to the gap (0 - 4cm) between the coils (i.e., water pipe diameter). Keywords— Air core, Coils, Iron core, Magnetic flux density, Magnetized water