Development of dual polarization battery model with high accuracy for a lithium-ion battery cell under dynamic driving cycle conditions

Abstract

Lithium-ion batteries are a key technology for electric vehicles. They are suitable for use in electric vehicles as they provide long range and long life. However, Lithium-ion batteries need to be controlled by a Battery Management System (BMS) to operate safely and efficiently. The BMS continuously controls parameters, such as current, voltage, temperature, state of charge (SoC), and state of health (SoH), and protects the battery against overcharging and discharging, imbalances between cells, and thermal runaways. The battery models and several prediction algorithms that the BMS uses to carry out these checks are essential to the system's performance. This research assesses the Dual Polarization (DP) model's ability to mimic actual battery performance in different dynamic driving conditions. In the study, a battery model for a Lithium–Nickel–Manganese–Cobalt-Oxide (Li-NMC) cell with a nominal capacity of 2 Ah is developed. A DP model was used in the study. Modeling and parameter estimation were performed in MATLAB Simulink/Simscape. Firstly, the model parameters are estimated depending on the SoC using the current and voltage data obtained from the Hybrid Pulse Power Characterization (HPPC) test. A further validation study of the model for low dynamic and high dynamic driving cycles is then presented. Dynamic Stress Test (DST), the US06 Supplemental Federal Test Procedure (SFTP) and Worldwide harmonized Light vehicles Test Procedure (WLTP) cycles were used for model validation. As a result of the study, the model's Root Mean Square (RMS) error values were obtained as 0.0053 V for DST, 0.0059 V for US06, and 0.008 V for WLTP. The obtained model is particularly successful for simulating a battery under dynamic current conditions and for use in control and prediction algorithms.