Development of CuS/C composite for microwave absorption using lignin biopolymer

Abstract

In recent decades, electronic devices have become a crucial component of everyday life and an increasingly important aspect of national security. However, despite their convenience, the emission of electromagnetic (EM) radiation from these devices has created a pollution issue that demands urgent attention. In this study, the properties and performance of CuS/C composites as EM wave-absorbing materials were examined. The main technique employed involved modifying the surface structure and properties of a lignin biopolymer via a fiber laser to derive porous carbon as a microwave absorber in the X-band range. Flower-like CuS microspheres were integrated into the porous carbon to improve the electrical conductivity and promote internal reflections. In addition, multilayer microwave absorbers were developed using CuS/C/epoxy composites with varying weight percentages, which were fabricated through refluxing and annealing techniques. The return losses of the absorbers in single- and multi-layer modes were optimized by modified local particle swarm optimization (MLPSO). The minimum average return loss improved to −15 dB (96.8%) by optimization in the 4-layer mode with a thickness of 1.8 mm. The optimum absorption peak in the 3-layer structure was −54.52 dB at a frequency of 8.83 GHz. The shielding effectiveness assessments indicated that the CuS/C/epoxy composite significantly improved the shielding capabilities of porous C and CuS, resulting in an increase of the shielding effectiveness threshold (SET) from less than 2 dB in lignin to more than 10 dB in CuS/C/epoxy.