Abstract

Aluminum loaded saponified Mango Waste i.e. Al (III)–SMW adsorbent, which functions as anion exchanger, was developed by loading Al (III) onto lime treated Mango waste biomass. The characterization of adsorbent was done by an Energy Dispersive X-ray (EDX) spectroscopy and chemical analysis techniques. Elemental analysis showed an exchange of Ca (II) or K (I) from SMW with Al (III) during loading reaction via cation exchange mechanism. Phosphate adsorption is strongly pH-dependent and maximum adsorption occurs at pH around 7– 9. The maximum uptake capacity of Al (III)–SMW for phosphate was found to be 3.28 mg/g from the Langmuir isotherm model. The residual concentration of phosphate was sharply decreased by increasing the amount of Al (III)–SMW and reached less than 0.07 mg/L (from 9.7 mg/L) with the use of only 6 g/L of Al (III)–SMW whereas higher than 7 g/L successfully removed 100% of phosphate from water. The adsorbed phosphate was successfully desorbed and the adsorbent was regenerated using dilute alkali solution. Therefore, the Al (III)–SMW adsorbent investigated in this research work is expected to be a potential material for the treatment of water polluted with a trace amount of phosphate from aqueous solution.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.