DEVELOPMENT OF AN AUTOMATED PROCESS CONTROL SYSTEM WITH A SUBSYSTEM FOR CONTINUOUS MONITORING OF EQUIPMENT STATUS FOR AN ENTERPRISE MANUFACTURING STAINLESS STEEL PIPES BY WELDING

Evgenii Grishin,Kirill Nesterov

doi:10.21303/2585-6847.2019.001029

Abstract

This article describes the process of developing an integrated process control system for an enterprise for the production of stainless steel pipes, based on the combination of local automation systems into a factory information technology system. Briefly describes the technological cycle of the production, the equipment used, its features, as well as its change as a result of the introduction of the process control system. It describes the requirements for quality control of products and methods for this control. The features and composition of the process control system are explained. The items of equipment included in the process control system are listed, their technical characteristics are given, and their choice is justified. Software and their structure, the interaction of elements in the system, the main tasks solved by the process control system and their influence on the quality of the finished product are described. The technical and economic analysis and justification of the application of the process control system for this production is carried out.

Highlights

DEVELOPMENT OF AN AUTOMATED PROCESSAfter the implementation ofThe Technotube LLC enterprise specializes in the production of welded stainless pipes for a wide range of consumers
The novel aspect of Currently, the company has five rolling mills and a stainless this work is fuzzy logic and fuzzy clusterization algorithms steel strip preparation section, and planned installation of a mill for the pro- continuous diagnostics [7]
APCS is implemented on the top level software Master SCADA of Russian design (InSat LLC), which will provide software support to the developer in case of complication of the international situation and the imposition of sanctions

Summary

Introduction

The Technotube LLC enterprise specializes in the production of welded stainless pipes for a wide range of consumers. CONTROL SYSTEM WITH A SUBSYSTEM FOR CONTINUOUS MONITORING OF EQUIPMENT STATUS FOR AN ENTERPRISE MANUFACTURING. STAINLESS STEEL PIPES BY WELDING the process control system, the following tasks will be changes in the organization and control of the production process: 1. For various grades of steel pipes includes the use of welding equipment. This article describes the process of developing an integrated process control system for an enterprise for the ric parameters. Passes necessary tests proving its production of stainless steel pipes, based on the combina-. The pipe tion of local automation systems into a factory information continuously monitored by nonis calibrated and cut into pieces technology system.

Methods

Results

Conclusion