Development of an algal treatment system for selenium removal: Effects of environmental factors and post-treatment processing of Se-laden algae.

Abstract

In developing an algal treatment system, selenium (Se) removal efficiency by Chlorella vulgaris was evaluated under various conditions such as Se concentration, algal density, temperature and pH. A maximum removal efficiency plateau of ∼90% was observed between 1000-3000 μg Se/L while the tolerance of Se toxicity was found at 6000 μg Se/L. C. vulgaris of 0.75 g DW/L showed the highest removal efficiency (84%), and volatilization was dominant below 1.37 g DW/L. Se volatilization was two times higher at 25 °C than at 20 °C in the first 24 h. Moreover, the highest removal efficiency (77%) was obtained at pH 8.0, compared to 66.5% at pH 6.5 and 40% at pH 10.0. To prevent ecotoxicity, Se laden algae were further burned to ashes or filtered out by Anodonta woodiana. After burning, biomass Se was reduced by 99%, with organo-Se entirely converted into inorganic Se, lowering Se bioavailability. A. woodiana removed 54% of Se in 24 h, leading to Se bioaccumulation in soft tissues, which may serve as dietary Se supplements for human health. Our results suggest the cleanup of Se-contaminated water from either agricultural runoff or industrial discharge could be achieved using an algal treatment system with minimum potential ecotoxicity.