Abstract
Solar energy can be used for substitution of the depleting fossil fuels in thermal applications and electricity generation through thermal route. For medium and high temperature applications, a system for collecting solar energy at high temperatures was developed and built in this research work. The system, built at the center of development of renewable energy of the Algiers, consists of a 2θm= 60o included angle, R0 = 0.90 m diameter spherical reflector with a cylindrical receiver filled with water, tracking reflector which moves into the focus following the sun's movement. The system is capable of heating water or other fluids to temperatures above 350oC, thus making it possible to obtain process heat for domestic use and to store solar energy in a compact and economical way. An analysis of the system's optical characteristics was performed to aid in the design of the spherical reflector and cylindrical receiver. The thermal performance of the system was analyzed. The effects of mirror reflection, concentration ratio, heat transfer to the fluid (water), incidence angle, size and form of the cylindrical receiver, environmental conditions (wind, ambient temperature), have been studied by means of thermal model.The performance of the spherical reflector was tested by the temperature of the water. Total efficiencies (solar to thermal) of ηth= 60% -70% were obtained for a wide range of temperatures up to 350oC. The results of the present study show that it is possible to use the spherical reflector for systems requiring process heat and make possible substantial utilization of solar energy and considerable savings relative to fossil energy in the sunny countries of the world.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have