Abstract
In this work, a semiactive electromagnetic vibration absorber has been developed based on a proposed electromagnetic stiffness adjustable spring model, which presents a new solution for adjusting stiffness in the field of vibration absorber devices. Simulation study on the electromagnetic spring has been performed to determine the structural parameter of the semiactive vibration absorber. An experimental rig is also built up to investigate its practical vibration control effectiveness. Firstly, the finite element model of the test bench is used to analyze its vibration characteristics. Then, the vibration reduction effect is predicted through the simulation analysis, from which the optimal control positions are found. Finally, the experimental studies are also conducted, and the results show that this semiactive electromagnetic vibration absorber has a frequency adjustment range from 21 Hz to 25 Hz, in which considerable vibration reduction from 5 dB to 10 dB can be achieved.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.