Development of a Matrix‐Matched Barite Reference Material (NWU‐Brt) for Calibration of In Situ S Isotope Measurements by Laser Ablation Multi‐Collector Inductively Coupled Plasma‐Mass Spectrometry

Abstract

A new matrix‐matched reference material (NWU‐Brt) with sulfur isotope ratios resembling those of natural barites has been developed for in situ S isotope measurements by laser ablation multi‐collector inductively coupled plasma‐mass spectrometry (LA‐MC‐ICP‐MS). A 100 g quantity of natural barite crystal was milled to ultra‐fine particles and sintered to a solid block using a fast hot‐pressing sintering technique (FHPS). We report δ34S ratios determined by isotope ratio mass spectrometry (IRMS), solution nebuliser multi‐collector inductively coupled plasma‐mass spectrometry (SN‐MC‐ICP‐MS) and LA‐MC‐ICP‐MS, involving up to six participating laboratories. The homogeneity of δ34S ratios of the synthesised barite was tested by LA‐MC‐ICP‐MS with an analytical spot size of 53 μm. The LA‐MC‐ICP‐MS results show that NWU‐Brt demonstrates a satisfactory homogeneous composition and is an appropriate material for calibrating δ34S ratios in barite. IRMS and SN‐MC‐ICP‐MS produced mean δ34S values of +14.17 ± 0.42‰ (2s) and +14.27 ± 0.23‰ (2s), respectively. The results of LA‐MC‐ICP‐MS analyses are consistent with the IRMS and SN‐MC‐ICP‐MS ratios within uncertainty. Overall, our results confirm the suitability of NWU‐Brt for the calibration of δ34S ratios in barite using LA‐MC‐ICP‐MS.