Abstract
Recently, the possibility to use compact accelerators coupled to high current ion sources for the production of intense low energy proton or deuteron beams has motivated many research laboratories to develop accelerator based neutrons sources for several purposes, including Neutron Capture Therapy (NCT). The NCT needs a high flux, about 10 9 n.cm-2.s-1, of thermal neutrons (E<10 keV) at the tumour site. Up to now, the NCT required neutron flux was mainly delivered by nuclear reactors. However, the production of such neutron flux is now possible using proton or deuteron beams on specific targets able to stand a high pow er (~15- 30 kW) on a small area (~10 cm2). This specific target design, materials and supports, has to cope with extreme physical constraints . The LPSC team has conceived an original solution formed by a thin (8 μm) rotating beryllium target depos ited on a graphite wheel and coupled with a beryllium sputtering device for periodic 9Be layer restoration. By means of 9Be (d,n) 10B nuclear reaction, this target irradiated by a 10- -20 mA deuteron beam (1.45 MeV) should produce the required neutron flux. In order to validate the target design of the neutron flux production and the beryllium target thermal capabilities, we built a 30 cm diameter rotating Beryllium target prototype and a compact electron beam line able to deliver a power density of 3kW/cm2.
Highlights
Neutron sources are used in many domains such as isotopes production, non-destructive imaging, subsurface exploration, silicon transmutation doping, and, in the medical, domain Neutron Capture Therapies profiting of the huge 10B neutron capture cross section [1,2] producing an energetic alpha particle and Li nuclear recoil with a 478 keV gamma ray in 94% of cases [fig 1]
Accelerator-based neutron sources appear like safe, compact and cheap solutions to produce a high neutron flux [3]. This is especially true for Neutron Capture Therapies, which require the highest thermal neutron flux produced by the smallest compact neutron source suitable to sit in a hospital
The heat, produced by the beam on the beryllium layer and the graphite disc, is transferred by radiation to the aluminium vacuum chamber, which is water-cooled on both sides [fig 4]
Summary
Neutron sources are used in many domains such as isotopes production, non-destructive imaging, subsurface exploration, silicon transmutation doping, and, in the medical, domain Neutron Capture Therapies profiting of the huge 10B neutron capture cross section [1,2] producing an energetic alpha particle and Li nuclear recoil with a 478 keV gamma ray in 94% of cases [fig 1]. Source developments is the robustness of the target under a continuous high current beam
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
