Development of a Real-Time Radiation Exposure Estimation Method Using a Depth Camera for Radiation Protection Education

Abstract

X-ray fluoroscopy causes relatively high radiation exposure to physicians, radiation professionals, and patients. Understanding the behavior of scattered radiation is crucial for reducing occupational exposure. We developed a system for estimating radiation exposure during fluoroscopy by monitoring the position of the physician using a depth camera for radiation protection education. The dose distribution of scattered radiation in an X-ray room was simulated using Monte Carlo code. The data were displayed using augmented reality markers, and the dose at each joint point location was estimated using body tracking. Additional functions were created, such as displaying arbitrary two-dimensional cross-sections. The system performance ranged from 9.0 to 11.0 FPS with or without motion and a protective apron. The estimated doses were 0.93 to 1.21 times the measured doses for all joint points, except for the chest and pelvis. The estimated doses for the chest and pelvis were lower than the measured dose, with the minimum values being 0.72 and 0.60 times lower for the chest and pelvis, respectively. The system provides valuable insight into the estimation of radiation dose at joint points based on the physician’s position and movements, the physician’s optimal fluoroscopy location, and warning of dangerous exposure doses.