Abstract
A superconducting multilayer coil usingCuNb/Nb3Sn wire was fabricated by the pre-bent react-and-wind (R&W) method. The pre-bent R&Wmethod is a combination of the pre-bending treatment and the conventional R&W process. A0.8% pre-bending strain was applied by ten fixed pulleys. The coil was tested inmagnetic fields of 14, 12, 11 and 10 T at 4.2 K. The coil quench current achieved100% load ratio of the short sample critical current in the 14 T back-up field. Thequench current of the outer section coil achieved 100% of the short sample criticalcurrent in the 12 T back-up field. The coil quench currents in various magneticfields are discussed from a hoop stress and mechanical disturbance point of view.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
