Development of a Platform at the Matter in Extreme Conditions End Station for Characterization of Matter Heated by Intense Laser-Accelerated Protons

Abstract

High-intensity short-pulse lasers have made possible the generation of energetic proton beams, unlocking numerous applications in high energy density science. One such application is uniform and isochoric heating of materials to the warm dense matter (WDM) state. We have developed a new experimental platform to simultaneously create and probe WDM at the matter in extreme conditions (MEC) end station at the Linac Coherent Light Source (LCLS). The short pulse optical laser (delivering up to 1 J in 45 fs) and the ultrabright LCLS X-ray laser with tunable frequency, respectively, deliver high power required to heat materials to WDM and precision-timed high-resolution X-rays to probe them. The laser-accelerated proton beam driven from a flat 1.5- $\mu \text{m}$ Cu foil was first measured then directed to a secondary sample of Al or polypropylene (PP), typically 300– $400~\mu \text{m}$ away. The time evolution of the sample electron temperature was measured using streaked optical pyrometry, where we observed a peak temperature of 0.9 ± 0.15 eV on the rear surface of an Al sample heated by the proton beam. Simulations using the hybrid-PIC code LSP and the rad-hydro code HELIOS show that a measured proton beam can heat Al to approximately 4 eV and PP to 1 eV if instead focused by a hemispherical Cu target. Through additional LSP simulations, we anticipate creating hotter WDM states (~20 eV) by increasing the laser energy to 10 J and keeping the other laser parameters fixed.