Development of a photopolymer holographic lens for collimation of light from a green light-emitting diode.

Abstract

A holographic optical element (HOE) was developed to collimate a monochromatic light-emitting diode (LED). The fabrication was achieved by the interference of collimated and diverging beams from a 532nm laser to produce the required photonic structure in a self-developing photopolymer material. The experimental values of diffraction efficiency and spatial period across the HOE were compared with their expected theoretical values. Good agreement was found for the spatial period; however, the diffraction efficiency varied significantly across the lens. In this paper, two approaches have been taken to address this variation: (1)modification of recording geometry and (2)optimization of recording intensity and exposure time at constant energy. The performance of an optimized HOE (cylindrical holographic lens) was then demonstrated using a 532nm laser beam. The optimized conditions for the cylindrical holographic lens were used to fabricate a spherical holographic lens of the same numerical aperture for LED applications. This type of lens has the potential to be used in combination with LED sources.