Abstract

Abstract. This paper presents a pedestrian indoor navigation system based on the multi-sensor fusion and fuzzy logic estimation algorithms. The proposed navigation system is a self-contained dead reckoning navigation that means no other outside signal is demanded. In order to achieve the self-contained capability, a portable and wearable inertial measure unit (IMU) has been developed. Its adopted sensors are the low-cost inertial sensors, accelerometer and gyroscope, based on the micro electro-mechanical system (MEMS). There are two types of the IMU modules, handheld and waist-mounted. The low-cost MEMS sensors suffer from various errors due to the results of manufacturing imperfections and other effects. Therefore, a sensor calibration procedure based on the scalar calibration and the least squares methods has been induced in this study to improve the accuracy of the inertial sensors. With the calibrated data acquired from the inertial sensors, the step length and strength of the pedestrian are estimated by multi-sensor fusion and fuzzy logic estimation algorithms. The developed multi-sensor fusion algorithm provides the amount of the walking steps and the strength of each steps in real-time. Consequently, the estimated walking amount and strength per step are taken into the proposed fuzzy logic estimation algorithm to estimates the step lengths of the user. Since the walking length and direction are both the required information of the dead reckoning navigation, the walking direction is calculated by integrating the angular rate acquired by the gyroscope of the developed IMU module. Both the walking length and direction are calculated on the IMU module and transmit to a smartphone with Bluetooth to perform the dead reckoning navigation which is run on a self-developed APP. Due to the error accumulating of dead reckoning navigation, a particle filter and a pre-loaded map of indoor environment have been applied to the APP of the proposed navigation system to extend its usability. The experiment results of the proposed navigation system demonstrate good navigation performance in indoor environment with the accurate initial location and direction.

Highlights

  • With the enormous progress in electronic and communication technologies, portable or wearable devices have become popular and affordable nowadays, and they have become widely used in various applications, such as sport monitoring and management, healthcare, visitor navigation, etc

  • A sensor calibration procedure based on the scalar calibration and the least squares methods are induced in this study to improve the accuracy of the inertial sensors

  • A pedestrian indoor navigation system based on the multisensor fusion and fuzzy logic estimation algorithms has been successfully developed in this study

Read more

Summary

INTRODUCTION

With the enormous progress in electronic and communication technologies, portable or wearable devices have become popular and affordable nowadays, and they have become widely used in various applications, such as sport monitoring and management, healthcare, visitor navigation, etc. With the calibrated inertial data, a PDR system based on multi-sensor fusion and fuzzy logic estimation algorithms is proposed It is a self-contained dead reckoning navigation that means no other outside signal is demanded. The International Archives of the Photogrammetry, Remote Sensing and Spatial Information Sciences, Volume XL-4/W5, 2015 Indoor-Outdoor Seamless Modelling, Mapping and Navigation, 21–22 May 2015, Tokyo, Japan calculated by integrating the angular rate acquired by the gyroscope of the developed IMU module.

Wearable Inertial Sensor Module Development
Sensor Error Model and Calibration Method
Accelerometer Calibration
Gyroscope Calibration
Pedestrian Navigation Scheme
Multi-Sensor Fusion Algorithm
Fuzzy Logic Estimation Algorithm
PEDESTRIAN NAVIGATION ALGORITHM
Findings
CONCLUSION

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.