Abstract
High pressure high temperature (HPHT) design is a significant new challenge facing the subsea sector, particularly in the Gulf of Mexico. API 17TR8 provides HPHT Design Guidelines, specifically for subsea applications. Fatigue endurance (i.e. S-N) and fracture mechanics design are both permitted, depending on the criticality of the component. Both design approaches require material properties generated in corrosive environments, such as seawater with cathodic protection and/or sour production fluids. In particular, it is necessary to understand sensitivity to cyclic loading frequency (for both design approaches), crack growth rates (for fracture mechanics approach) as well as fracture toughness performance. For many subsea components, the primary source of fatigue loading is associated with the start-up and subsequent shutdown operation of the well, with long hold periods in-between, during which static crack growth could occur. These are the two damage modes of most interest when performing a fracture mechanics based analysis. This paper presents the preliminary results of a novel single specimen test method that was developed to provide fatigue crack growth rate and fracture toughness data in corrosive environments, in a timeframe that is compatible with subsea HPHT development projects. Test data generated on alloy 625+ in seawater with cathodic protection is presented along with a description of how the test method was developed. A crack tip strain rate based formulation was applied to the data to rationalize the effect of frequency, stress intensity factor range (ΔK) and maximum stress intensity factor (Kmax).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.