Development of a novel cross-axis countercurrent chromatographic instrument with six separation columns: Design, dynamics, optimization, prototyping, and experiment.

Abstract

This paper presents the development of a novel cross-axis countercurrent chromatographic instrument (CCCI) with six separation columns, including design, dynamics, optimization, prototype construction, and experimental validation. The conceptual design and the structural design of the cross-axis CCCI are performed while considering the requirements for the separation operation and design. The dynamic analysis is carried out in order to guarantee the local balance and the global balance for the CCCI. The relationship between the mechanical structure parameters and partition efficiency is investigated by analyzing the effect of mechanical structure parameters on the centrifugal force field. By virtue of the modal analysis of the mechanical structure, the critical speed and the weak link of the CCCI are achieved. Aiming at the problem of the weak link, the structural optimization is done. The presented CCCI has six separation columns distributed around the central revolution axis, and it has more separation columns than that of the existing chromatographic instrument. The CCCI has an axial symmetry structure in the three-dimensional space. Thus it can have better dynamics stability than the CCCI having less separation columns with a symmetry structure in the plane. A physical prototype is built, and then the partition efficiency and its effect factors are tested by the single experimental variable method. The results show that the CCCI runs smoothly and has a good retention rate of stationary phase. It is also proved that the developed CCCI has a good partition efficiency on bovine serum albumin and lysozyme.