Development of a nondestructive compliance test for resilient denture liners.

Abstract

Resilient denture liners are prescribed for patients who cannot adjust to hard-based dentures because of a thin mucosa or severe alveolar ridge resorption. A nondestructive test to evaluate compliance of new soft liner materials will be useful in clinical trials. The purpose of this study was to evaluate a nondestructive compliance testing technique designed to characterize long-term, silicone-based resilient denture liner materials. Samples of thicknesses of 1.1, 2.2, 3.3, and 4.4 mm of 2 materials (MPDS-SL [Lai Laboratories, Inc, Burnsville, MN] and Molloplast-B [Buffalo Dental, New York, NY]) were assessed for compliance using a closed-loop servohydraulic testing system, applying a 3 lb force following a squarewave pattern; force and position values were recorded using a storage oscilloscope. The oscilloscope values were analyzed using computer software to determine compliance values. The effect of material thickness was examined by testing wedges of the 2 materials. The testing technique used showed that differing thicknesses had significantly different compliance values (p <.0001). In the materials used to evaluate the technique, MPDS-SL behaved more elastically than did Molloplast-B (p <.0001). Material thicknesses beyond 2.2 mm did not increase compliance, although MPDS-SL had a steeper thickness-compliance curve than Molloplast-B. The method used to test compliance proved to be sufficiently sensitive to distinguish between 2 materials and between varying thicknesses. The sensitivity and nondestructive nature of this test show its suitability for clinical evaluation of resilient denture liners.