Abstract
AbstractWe investigated the appearance of flow and weld lines when metallic pigments are used in polymer blends and how such lines can be eliminated by improving the pigment particle shape and optimizing pigment loading. Acrylonitrile butadiene styrene copolymer and two types of aluminum flakes, lamellar and three‐dimensional (3D), were blended in a twin‐screw extruder with a screw diameter of 25 mm. The temperatures from the hopper to the nozzle were 140, 180, 220, 220, 220, 220, and 220°C. Weld and flow lines were observed using field‐emission scanning electron microscopy and energy dispersive X‐ray spectroscopy of specially manufactured injection specimens. In the flow line region, traditional lamellar flakes were randomly oriented, while 3D flakes exhibited a distinct and stable orientation. Based on these observations, flow and weld lines in a finished metal/polymer blend can be minimized by using 3D metal particles in place of lamellar flakes. We also investigated the effects of aluminum flake loading on weld and flow line visibility. At low loading, weld lines were clearly visible due to the lack of pigmentation in the front of the polymer flow. Conversely, high loading resulted in relatively high concentrations of pigment near the weld line area, reducing weld line visibility. These findings suggest that there is an optimum metal loading level where the visibility of flow and weld lines is minimized.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
