Abstract
Most of the prior studies on the prediction of fatigue lives have been limited to uniaxial loading cases, whereas real world loading scenarios are often multiaxial, and the prediction of fatigue life based upon uniaxial fatigue properties may lead to inaccurate results. A detailed exploration of multiaxial fatigue under constant amplitude loading scenarios for a range of metal alloys has been performed in this study, and a new methodology for the accurate prediction of fatigue damage is proposed. A wide variety of uniaxial, torsional, proportional and non-proportional load-paths has been used to simulate complex, real-world loading scenarios. Test data have been analyzed and a critical-plane based fatigue damage parameter has been developed. This fatigue damage parameter contains stress and strain terms, as well as a term consisting of the maximum value of the product of normal and shear stresses on the critical plane. The shear-dominant crack initiation phenomenon and the combined effect of shear and tensile stresses on micro-crack propagation have been modeled in this work. The proposed formulation eliminates many of the shortcomings of the earlier developed critical-plane fatigue damage models. It is mathematically simple with substantially fewer material dependent constants, and provides design engineers with a tool to predict the fatigue life of machine parts with minimal computational effort. This life prediction methodology is intended for a wide variety of LCF and HCF loadings on machine parts made of metals including advanced alloys. KEYWORDS. Multiaxial; Fatigue Damage Parameter; Non-proportional loading.
Highlights
Fatigue is one of the most prolific phenomena responsible for the failure of machine parts
Most of the prior studies on the prediction of fatigue lives have been limited to uniaxial loading cases, whereas real world loading scenarios are often multiaxial, and the prediction of fatigue life based upon uniaxial fatigue properties may lead to inaccurate results
The proposed formulation eliminates many of the shortcomings of the earlier developed critical-plane fatigue damage models. It is mathematically simple with substantially fewer material dependent constants, and provides design engineers with a tool to predict the fatigue life of machine parts with minimal computational effort. This life prediction methodology is intended for a wide variety of LCF and HCF loadings on machine parts made of metals including advanced alloys
Summary
Fatigue is one of the most prolific phenomena responsible for the failure of machine parts. Efforts have been made by several researchers [1,2,3,4] to represent the multiaxial stress state by an equivalent uniaxial stress value using von Mises or Tresca type equations. This approach fails to adequately account for many complexities like LCF-HCF interactions and the effects of non-proportional loading. Unlike equivalent-stress based models, energy-based fatigue theories compute the damage by estimating the strain energy within each fatigue cycle [5,6,7,8,9]. The Erickson et al [17], Findley [10] and Fatemi-Socie [16] damage parameters have been assessed for their complexity and ability to accurately estimate the fatigue damage, and a comparatively simpler formulation has been proposed
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
