Abstract
This article proposes a new method for monitoring the thermal state of the lining of hightemperature units. Firstly, it is shown that the main methods for monitoring the thermal state of the lining are limited to obtaining data to prevent an emergency situation – leakage of the working medium through the lining and does not allow to obtain data on the temperature distribution over the cross section of the lining, for monitoring nonstationary thermal processes. Secondly, a method for determining the thermal state of the lining of a thermal unit is proposed, which allows one to obtain data on the temperature fields of the lining in the process of nonstationary heat conduction and use these values to control the process. Thirdly, to test the developed method, a physical model of the process of heating the lining of a high-temperature unit was created. Fourth, testing the physical model of the heating process showed that the developed method can be applied in practice, since its error does not exceed 10%
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Journal of Siberian Federal University. Engineering & Technologies
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
