Development of a measurement method to determine the ceiling exposure concentration of ortho-phthalaldehyde handling workers.

Abstract

ObjectivesThe purpose of this research was to develop and validate an analytical method for rapid determination of the exposure of workers to ortho‐phthalaldehyde (OPA) at the ceiling threshold concentration.MethodsA 2,4‐dinitrophenylhydrazine (DNPH)‐silica cartridge was chosen as a sampler. OPA collected by the DNPH‐silica cartridge was subsequently extracted with 5 mL of acetonitrile. A 50‐µL aliquot of phosphoric acid/acetonitrile solution (2%, v/v) was added to 950 µL of the extraction solution and allowed to stand for 30 minutes at room temperature. This solution was then analyzed by high‐performance liquid chromatography tandem mass spectrometry. The basic characteristics of the proposed method, such as recovery, repeatability, limit of quantification, and storage stability of the samples, were examined.ResultsThe overall recoveries of OPA from OPA‐spiked DNPH‐silica cartridges were 93.6%‐100.1% with relative standard deviations, representing the repeatability, of 1.5%‐10.8%. The limit of quantification was 0.165 ng/sample. The recovery of OPA from DNPH‐silica cartridges after 5 days of storage in a refrigerator exceeded 95%.ConclusionsThe proposed method enabled the determination of the OPA concentration corresponding to the Threshold Limit Value‐Ceiling of 0.1 ppb recommended by the American Conference of Governmental Industrial Hygienists, with a minimum sampling time of 18 seconds (corresponding to a sampling volume of 300 mL at 25°C and 1 atm). Thus, this method will be useful for estimating worker exposures to OPA.