Abstract
In CO2 arc welding of solid wire, metal transfer phenomena and spatter generation are investigated with rectangular pulse current, and a low spatter CO2 arc welding process with high frequency pulse current is developed. The optimal conditions of high frequency pulse CO2 arc welding are in the range of peak current: 450–550 A and pulse frequency: 450–750 Hz. These high frequency pulse currents have the effect of droplet oscillation due to resonance between applied pulse frequency and the natural frequency of the droplet. The droplet is transferred consistently every 9–11 pulses and the average interval of metal transfer is about 16 ms which is reduced to half that of conventional CO2 arc welding. This average droplet weight is 34 mg, showing a large reduction in comparison with that of the conventional method. As a result, total spatter weight is reduced by 70% in comparison with the conventional method, and especially, large spatters more than 0.5 mm in diameter are reduced from 1.5 to 0.2 g/min.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
